FREE DELIVERYWhen you spend £35 or more
SAME-DAY DESPATCHWhen you order before 2.00PM
LOYALTY POINTSDiscount on future orders
14 Day return policy
Dolls house chandelier adaptor. Attach to light and plug in.t0 copper tape run.
Suppliers instructions for use:
This Adapter can be used with either vertical or horizontal Tape Runs. Make holes in the Tape run for the rivets and push these in with the correct spacing using the pins on the small disc supplied. On the Lamp, remove the foam sticker and any residue. separate and cut the wires approximately 2 in length. Strip wires starting as close to the lamp as possible. (be careful) As you pull off the insulation twist the bare wires then snip off. Give the Lamp a test and make sure it is working. Apply super glue to back of lamp and and pass stripped wires through adaptor ring (gold ring) and then pass wires through adaptor disc pulling gently on the wires to keep straight and snap into place. Then push lamp into the Wall or ceiling eyelets. Then check of operation.
Customers who bought this product also bought.
Please Note: Products for sale on this website are adult
collectors and hobby craft items. Unless otherwise stated items are not CE marked and are not suitable for children under 14 years of age.